Masterflex ISMATEC 78018-50, Руководство по эксплуатации, Страница: 44 / 65

3-35 Masterflex REGLO Digital Pump Drive with Advanced Connectivity
Section 3: Operation
Masterflex
is enabled you may be prompted for a Username and Password (for further information see " User
Management " on page 3-9). The touchscreen display will revert to the previously used operation mode.
• Confirm that the pump head has been calibrated (for further information see " Pump Head Calibration " on
page 3-12).
• If required, prime the pump (for further information see " Priming the Pump " on page 3-11).
• Confirm that the pump drive is connected to the internet via an active Wi-Fi or Ethernet connection (for
further information see " WI-FI Settings " on page 3-8 or " Ethernet Settings " on page 3-8).
• Confirm the digital device you are using is connected to the internet.
To connect to MasterflexLive™:
1. Go to www.masterflex.com and type masterflexlive into the search bar.
2. Follow the onscreen prompts to log in or create a new account.
3. Follow the onscreen prompts to add your REGLO pump drive.
NOTE: The Device ID (listed as the
MAC Address) and Device Model Number are listed under " Device Information " on page 3-7. The
MAC Address is also located on a label on the pump drive.
4. Select the desired pump drive from the list of available devices. The MasterflexLive™ Web App Run Screen
will be displayed.
NOTE:
• Once the pump drive is connected to MasterflexLive™ the pump drive can be operated and monitored
from the MasterflexLive™ Web App Run Screen and adjustments can be made to any of the pump
settings.
• Tap STOP on the pump drive touchscreen to stop the pump operation. NOTE: If locked, the screen
will need to be unlocked before the pump operation can be stopped.