Masterflex ISMATEC 78018-50 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 65

Masterflex ISMATEC 78018-50 Скачать руководство пользователя страница 17

3-8

Masterflex REGLO Digital Pump Drive with Advanced Connectivity

Section 2: Basic Setup & Settings

Masterflex

WI-FI Settings

The REGLO can connect to a network using Wi-Fi and Ethernet connections.

NOTE:

• The Ethernet connection will take priority if both Wi-Fi and Ethernet are used simultaneously.
• The REGLO supports WEP, WPA, WPA2, and None (open) Wi-Fi security protocols.

To select a Wi-Fi network:

1.  Tap SETTINGS   from any of the mode screens. The Settings Screen will be displayed.
2.  SCROLL  through the Settings Screen pages to locate WIFI SETTINGS.
3.  Tap WIFI SETTINGS. The Wi-Fi Settings Screen will be displayed.
4.  If required, tap the WIFI toggle to select either ON or OFF.
5.  Tap the desired Wi-Fi network from the available list.
6.  If required, enter the network password using the onscreen keypad.
7.  Tap CONNECT to join the network or CANCEL to cancel.
8.  Tap

CONFIRM

to return to the Settings Screen.

To remove a Wi-Fi network:

1.  Tap SETTINGS   from any of the mode screens. The Settings Screen will be displayed.
2.  SCROLL  through the Settings Screen pages to locate WIFI SETTINGS.
3.  Tap WIFI SETTINGS. The WIFI Settings Screen will be displayed.
4.  Locate the desired Wi-Fi network and tap REMOVE WIFI .
5.  Tap REMOVE to remove the network or CANCEL to discard changes.
6.  Tap

CONFIRM

to return to the Settings Screen.

Ethernet Settings

The REGLO can connect to a network using Wi-Fi and Ethernet connections.

NOTE:

• Confirm that the Ethernet cable is securely attached to the Ethernet port at the rear of the pump drive.
• The Ethernet connection will take priority if both Wi-Fi and Ethernet are used simultaneously.

To configure Ethernet settings:

1.  Tap SETTINGS   from any of the mode screens. The Settings Screen will be displayed.
2.  SCROLL  through the Settings Screen pages to locate ETHERNET SETTINGS.
3.  Tap ETHERNET SETTINGS. The Ethernet Settings Screen will be displayed.
4.  Tap DHCP to automatically configure IP settings or STATIC to manually edit settings using the onscreen

keypad.

5. Tap CONFIRM to save or CANCEL to discard changes.

«
...
15
16
17
18
19
...
»

Содержание ISMATEC 78018-50


































































Отзывы:

Нет отзывов