4
®
®
Speed Setting
I/P
®
26
I/P
®
73
I/P
®
82
I/P
®
70
I/P
®
88
I/P
®
89
10%
0.4 LPM
0.8 GPM
1.3 LPM
0.8 LPM
1.3 LPM
1.7 LPM
0.11 GPM
0.21 GPM
0.35 GPM
0.21 GPM
0.35 GPM
0.45 GPM
20%
0.8 LPM
1.6 LPM
2.6 LPM
1.6 LPM
2.6 LPM
3.4 LPM
0.22 GPM
0.42 GPM
0.70 GPM
0.42 GPM
0.70 GPM
0.90 GPM
30%
1.2 LPM
2.4 LPM
3.9 LPM
2.4 LPM
3.9 LPM
5.1 LPM
0.33 GPM
0.63 GPM
1.05 GPM
0.63 GPM
1.05 GPM
1.35 GPM
40%
1.6 LPM
3.2 LPM
5.2 LPM
3.2 LPM
5.2 LPM
6.8 LPM
0.44 GPM
0.84 GPM
1.40 GPM
0.84 GPM
1.40 GPM
1.80 GPM
50%
2.0 LPM
4.0 LPM
6.5 LPM
4.0 LPM
6.5 LPM
8.5 LPM
0.55 GPM
1.05 GPM
1.75 GPM
1.05 GPM
1.75 GPM
2.25 GPM
60%
2.4 LPM
4.8 LPM
7.8 LPM
4.8 LPM
7.8 LPM
10 LPM
0.66 GPM
1.26 GPM
2.1 GPM
1.26 GPM
2.1 GPM
2.70 GPM
70%
2.8 LPM
5.6 LPM
9.1 LPM
5.6 LPM
9.1 LPM
12 LPM
0.77 GPM
1.47 GPM
2.45 GPM
1.47 GPM
2.45 GPM
3.15 GPM
80%
3.2 LPM
6.4 LPM
10 LPM
6.4 LPM
10 LPM
14 LPM
0.88 GPM
1.68 GPM
2.8 GPM
1.68 GPM
2.8 GPM
3.60 GPM
90%
3.6 LPM
7.2 LPM
12 LPM
7.2 LPM
12 LPM
15 LPM
0.99 GPM
1.89 GPM
3.15 GPM
1.89 GPM
3.15 GPM
4.05 GPM
100%
4 LPM
8 LPM
13 LPM
8 LPM
13 LPM
17 LPM
1.1 GPM
2.1 GPM
3.5 GPM
2.1 GPM
3.5 GPM
4.5 GPM
AUTOMATIC START ON/OFF (Internal mode only)
Press and hold DIR on power-up. After five (5) seconds, display will read “ON” (factory default) or “OFF”. Hold the
DIR key for an additional 3 seconds and the display will toggle to the other option every 3 seconds. Release the
DIR key when the desired mode is being displayed. After releasing the key, “ON” or “OFF” will remain displayed
for about 3 seconds and then the normal power-on sequence will begin. When “ON” is selected, drive will start
automatically at power-up if it was running when powered down.
SETUP AND DRIVE OPERATION
1.
Attach any external control connections. (Model 77411-00 only)
2.
Mount pump head and load tubing (see pump head manual).
NOTE:
The High-Performance I/P
®
pump is mounted with the tubing to the left. The Standard I/P
®
pump is
mounted with the tubing up. The Easy-Load
®
I/P
®
pump is mounted with the occlusion bed up.
3.
Turn drive on.
4.
Select INTernal or EXTernal operation. (Model 77411-00 only)
5.
Select pump DIRection (clockwise or counter-clockwise).
6.
Press STOP/START key to begin pumping.
7.
Adjust speed (listed flow rates are for reference only. Flow will vary with pressure, tubing, viscosity, and time):
NOTE:
While in INTernal mode, drive will automatically restart after a brownout or power out condition unless
operator changes default setting. If speed is being controlled by an external signal, drive will automatically
restart with a non-zero speed command.
