2.3
Work environment
• Keep the work environment clean and neat.
• Use dry, filtered and with anti-corrosive oillubricated air.
If not available, put 0.1 ml (approximately 5 drops) of anti-
corrosive lubricating oil in air connection of tool three
times each operating day.
• Work in a frost-free environment.
• The connection to the tools is G¼“.
A connection nipple has not been included.
Provide an appropriate solution yourself.
Set a constant air pressure to 5 - 7 bars
(maximum 7 bars).
2.4 Tools
Never use the tools
- when the anvil (A) is missing;
• Check the tools for damage before connecting
the air pressure.
• Keep the tools in an optimum condition.
• Switch off the closing valve (F) when the tools
are not used.
• Make sure that the flexible connection hose (M)
is not pressurised when disconnecting.
• Do not modify the tools in any way.
• Only use the device for appropriate purposes
2.5 Serial number
This is the place of the serial number (X) of the
tools.
2.6 Type identification
This is the place of the type identification (Y) of
the tools.
5
A
EZM4000
R
EZM4000
X
Y
F
M
