MasterCraft MAXIMUM 054-1232-4 Скачать руководство пользователя страница 5

Страница: 5 / 19

model no. 054-1232-4 | contact us 1.800.689.9928

• Protect your hearing.

Wear appropriate personal hearing protection during use.

Under some conditions, noise from this product may contribute to hearing loss.

• All visitors and bystanders must

wear the same safety equipment required for

the operator.

• Inspect the tool’s power cords periodically,and

if they are damaged, have

them repaired by a qualified service technician. be aware of the location of
the cord.

• Always check the tool for damaged parts.

Before using the tool, any guard

or other part that is damaged should be carefully checked to determine
whether it will operate properly and perform its intended function. Check
for misalignment or binding of moving parts, broken parts, and any other
condition that may affect the tool’s operation. A guard or other part that
is damaged should be properly repaired or replaced by a qualified service
technician.

• Inspect and remove all nails from lumber before sawing.

• Save these instructions.

Refer to them frequently, and use them to instruct

others who may use this tool. If someone borrows this tool, make sure they
also have these instructions.

• The label on your tool may include the following symbols. The symbols and

their definitions are as follows:

V ..................... Volts

A ..................... Amperes

Hz ................... Hertz

W .................... Watts

min ................. Minutes

............... Alternating current

............. Direct current

................... No-load speed

............... Class II Construction

…/min ........... Revolutions or reciprocation per minute

............... Grounding terminal

BPM ............... Beats per minute

.............. WARNING – To reduce the risk of injury, user must read

instruction manual.

• The laser beam can be harmful to the eyes

. Always avoid direct eye exposure.

Do not look directly into the laser beam output aperture during operation. Do
not project the laser beam directly into the eyes of others. Turn the laser on
only when making cuts.

• The laser on the orbital jigsaw is not a toy.

Always keep the tool out of the

reach of children. The laser light emitted from this device should never be
directed toward any person for any reason.

• be sure the laser beam is aimed at a workpiece (such as wood or rough coated

surfaces) that does not have a reflective surface.

• do not use on surfaces like sheet steel that have a shiny, reflective surface.

The shiny surface may reflect the beam back at the operator. Be aware that
laser light reflected off a mirror or any other reflective surfaces can also be
dangerous.

• Always turn the laser beam off when not in use.

Leaving the tool on increases

the risk of someone inadvertently staring into the laser’s beam.

CAUTION!

Always follow the instructions in this manual when using this laser.
The use of this feature in any manner other than what appears in this
manual may result in hazardous radiation exposure.

• do not attempt to modify the performance of this laser device in any way.

This

may result in a dangerous exposure to laser radiation.

• Use only the accessories that are recommended by manufacturer for use with

this model.

The use of accessories that have been designed for use with other

laser tools could result in serious injury.

SAfeTY INSTRUCTIONS fOR The ORbITAL JIgSAw

• hold the tool by the insulated gripping surfaces (handles) when performing

any operation where the cutting tool may contact hidden wiring or its own
cord.

Contact with a “live” wire will make the exposed metal parts of the tool

“live”, and may shock the operator.