MasterCraft 55-6898-8, Руководство по эксплуатации

Страница: 5 / 26

5
WARNING:
The operation of any tool can result in foreign objects being
propelled into the eyes, which could result in severe eye damage. When operating a
power tool, always wear safety goggles or safety glasses with side shields, or a full-
face shield, if necessary.
Check for damaged parts.
Before further use of the tool, a guard or other part that
is damaged should be carefully checked to determine that it will operate properly and
perform its intended function. Check for alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any other conditions that may affect the
operation of the tool. A guard or other part that is damaged should be properly
repaired or replaced.
Never leave the tool unattended while the power is “on.”
Turn the power “off.” Do
not leave the tool until the blade has come to a complete stop and the Mitre Saw has
been unplugged.
Do not over-reach.
Keep proper footing and balance at all times.
Maintain tools with care.
Keep tools sharp and clean for optimum performance.
Follow instructions for lubricating and changing accessories.
CAUTION:
Do not attempt to operate this tool until having thoroughly read all
instructions, safety rules, and warnings. Failure to comply can result in fire, electric
shock, or serious personal injury. Retain the Operating Manual for future reference
and review it frequently.
WARNING:
Dust generated from certain materials can be hazardous to one’s
health. Always operate the saw in a well-ventilated area, and provide for proper dust
removal.
ELECTRICAL SAFETY
Ground instruction:
In the event of a malfunction or
breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. This tool is
equipped with an electric cord having an equipment-grounding
conductor and a grounding plug. The plug must be plugged into
a matching outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Do not modify the plug provided. If it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole
receptacles that accept the tool’s plug.
Permanently connected tools:
This tool should be connected to a grounded metal
permanent wiring system or to a system having an equipment-grounding conductor.