MasterCraft 55-6898-8, Руководство по эксплуатации

Страница: 3 / 26

3
RULES FOR SAFE OPERATION
KNOW THE TOOL
To operate this tool safely, carefully read this operating manual and all the labels
affixed to the Compound Mitre Saw before using it, and follow all instructions
contained therein. Retain this manual for future reference.
MPORTANT
This tool should only be serviced by a qualified service technician.
READ ALL INSTRUCTIONS THOROUGHLY
SAFETY PRECAUTIONS FOR LASERS
This Mitre Saw has a built-in laser light. The laser is ClassIIlA and emits output power
of a maximum 2.5mW and 635-650nm wavelengths. These lasers do not normally
present an optical hazard. However, DO NOT stare at the beam, as this can cause
flash blindness.
CAUTION:
The following label is on the tool. It
indicates the location from which the saw emits the
laser light.
Be aware
of the laser-light location
when using. Always make sure that any
bystanders in the vicinity of use are made aware of
the dangers of looking directly into the laser.
•
Do not
remove or deface any product labels. Removing product labels increases
the risk of exposure to laser radiation.
•
The laser beam can be harmful to the eyes.
Always avoid direct eye
exposure.
•
Do not
look directly into the laser-beam-output aperture during operation.
•
Do not
project the laser beam directly into the eyes of others.
•
Turn the laser on
only
when making cuts. The laser on the Mitre Saw is not a toy.
Always
keep it out of the reach of children. The laser light emitted from this
device
should never
be directed toward any person for any reason.
•
Be sure
that the laser beam is aimed at a work piece (such as wood or a rough-
coated surface) that does not have a reflective surface.
•
Do not
use on materials, such as sheet steel, that have shiny, reflective surfaces.
The reflective surface could reflect the beam back at the operator. Be aware that
laser light reflected off of a mirror or any other reflective surfaces can also be
dangerous.
•
Always
turn the laser beam off when it is not in use. Leaving the tool on
increases the risk of someone inadvertently staring into the laser's beam.
CAUTION:
Always follow the instructions contained in this manual when using
this laser. Use of this feature in any manner other than which is directed in this
manual may result in a hazardous radiation exposure.
•
Always
wear laser-protective eyewear when working on or near reflective
surfaces