manualshive.com logo in svg

MasterCraft 2013 XStar, Руководство пользователя

Поделиться
Скачать
MasterCraft 2013 XStar Скачать руководство пользователя страница 269

2021 OWNERS MANUAL / 

268

Skiing, wakeboarding or any type of towing behind all towers 
should occur only with the tower in the full, upright and locked 
position. Failure to do so could result in serious injury or death.

In over-the-road transit, the adjustable towers should only be in a 
fully upright or fully lowered position to avoid potential damage to 
the tower and/or boat. ZFT2 and ProStar towers should  only be 
towed in the upright position.

 
 
 
Always ensure that there are no people, power lines or objects in the 
way when raising and lowering the tower. Individuals and their limbs 
may be subject to injury if CAUGHT IN THE PATH OF THE TOWER.

SPECIAL ATTENTION

MASTERCRAFT HAS CAREFULLY DETERMINED THE MAXIMUM 
AMOUNT OF ACCESSORIES AND TOTAL WEIGHT THAT THE TOWER 
CAN SAFELY HOLD. IGNORING THIS INFORMATION COULD RESULT 
IN INJURY TO THE BOAT OPERATOR AND/OR PASSENGERS. 

 
 

85 pounds is the maximum aggregate weight allowed for accesso-
ries mounted on the tower. Exceeding this restriction can result in 
tower failure, which could cause serious injury or death to the boat 
operator and/or passengers.

Additional Special Attention

Occupants of the boat should never stand on, sit on or jump from 
the tower. MasterCraft towers should only be used for approved 
sport towing. (See the Safety section of this Owner’s Manual for a 
list of approved activities.)

Additional Special Attention

If you should have questions regarding the hydraulic tower, includ-
ing questions about: the manufacturer, installation instructions, a 
system diagram, part numbers for hydraulic hoses or fittings, thread 
sealant, hydraulic fuel, pump filling processes, test procedures 
operating pressure, alternate means of operation, maintenance, or 
troubleshooting, contact your authorized MasterCraft dealer, who 
can contact the OEM manufacturer of the tower and pump. 

Troubleshooting

If a ZFT7 tower does not respond to the switch, verify that the circuit 
has not tripped at the pump. If the circuit has not tripped on the 

2021MCOwnerManualFINAL.indd   268

8/26/20   1:53 PM

Содержание 2013 XStar



















































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды