manualshive.com logo in svg

MasterCraft 2013 XStar, Руководство пользователя

Поделиться
Скачать
MasterCraft 2013 XStar Скачать руководство пользователя страница 265

2021 OWNERS MANUAL / 

264

•  While applying some upward/forward pressure on the tower 

header, loosen one of the hand knobs.

•  Repeat for the other side (or a second person can do this simul-

taneously).  

NOTE: Typically, it is easier to loosen both sides first 

compared to completely removing one knob and then loosening 
and removing the second. The angled threaded can put the tow-
er/threads in a bind.  

•  Completely unscrew the hand knobs until they are disengaged (a 

spring pushes them out).

•  Fold tower back and rest it on the motor box (or the tower stands 

included with the boat to protect upholstery).

If Removing, Follow These Additional Steps:

•  Pull excess wires out from under the deck.

•   Disconnect the light wires. 

NOTE: On the tower side, fold the wires up and push up in the tower 
tube. On the deck side, fold/loop the wires up and stuff back in the 
access hole.

Purpose

Towers add a whole new dimension of appealing boating enjoyment. 
Because of their versatility. With their high tow points, optional 
lighting accents and optional speaker packages, many boat owners 
consider towers to be an essential addition to their boat.

Location

Towers are generally located amidships. On each model, a careful 
and thorough testing program was conducted by MasterCraft en-
gineers to ensure maximum towing benefit while keeping the boat 
properly balanced. This is extremely important and it is why Master-
Craft strongly discourages the addition of after-market towers. Boat 
owners are strongly urged to purchase towers and tower acces-
sories only through an authorized MasterCraft dealer. Installation 
of any tower that is not specified and installed by MasterCraft may 
void the warranty.

Operation

MasterCraft strongly encourages the occupants of the boat to review 
the Common Sense Approach and the Safety sections of this Own-
er’s Manual prior to using the boat’s tower and tower equipment.

Raising and Lowering the ProStar Tower

Lowering (And Leaving The Tower Attached):

2021MCOwnerManualFINAL.indd   264

8/26/20   1:53 PM

Содержание 2013 XStar



















































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды