background image

WARNING: Risk to Breathing

WARNING: Risk of Electric Shock

HAZARD

Electrical Grounding: Failure to provide

adequate grounding for this product

could result in serious injury or death

from electrocution. 

See grounding instructions.

Make certain that the electrical circuit

to which the compressor is connected

provides proper electrical grounding,

correct voltage and adequate fuse

protection.

6

 

 

HAZARD

How To Prevent It

What Could Happen

How To Prevent It

What Could Happen

Your air compressor is powered by 

electricity. Like any other electrically 

powered device, it may cause electric 

shock if it is not used properly.

Never operate the compressor outdoors 

when it is raining or in wet conditions.

Never operate the compressor with 

missing or damaged protective covers.

Repairs attempted by unqualified 

personnel can result in serious injury or 

death by electrocution.

The compressed air directly from your 

compressor is not safe for breathing.

The air stream may contain carbon 

monoxide, toxic vapors, or solid particles 

from the tank. Breathing these contami-

nants can cause serious injury or death.

Air obtained directly from the compressor 

should never be used to supply air for 

human consumption. In order to use air 

produced by this compressor for breathing, 

suitable filters and in-line safety equipment 

must be properly installed. In-line filters 

and safety equipment used in conjunction 

with the compressor must be capable of 

treating air to all applicable local and 

federal codes prior to human consumption.

Sprayed materials such as paint, paint 

solvents, paint remover, insecticides, and 

weed killers, may contain harmful vapors 

and poisons.

Work in an area with good cross-

ventilation  Read and follow the safety 

instructions provided on the label or safety 

data sheets for the materials you are 

spraying. Use approved respirator that is 

designed for use with your specific 

application.

Any electrical wiring or repairs required on 

this product should be performed by 

authorized service centre personnel in 

accordance with national and local 

electrical codes.

Содержание 099-4119-2






























Отзывы: