background image

Save these instructions

HAZARD

WARNING: Risk of explosion or fire

How To Prevent It

What Could Happen

4

IMPORTANT SAFETY INSTRUCTIONS

 

   

It is normal for electrical contacts within 

the motor and pressure switch to spark.

Always operate the compressor in a 

well-ventilated area free of combustible 

materials, gasoline, or solvent vapors.

If spraying flammable materials, locate the 

compressor at least 20' (6 m) away from 

the spraying area. An additional length of 

hose may be required.

Store flammable materials in a secure 

location away from the compressor.

Never place objects against or on top of 

the compressor. Operate the compressor 

in an open area at least 12" (30 cm) away 

from any wall or obstruction that would 

restrict the flow of fresh air to the 

ventilation openings.

Operate the compressor in a clean, dry, 

well-ventilated area.

Always remain in attendance with the 

product while it is operating.

Always disconnect electrical power by 

moving the pressure switch lever to the off 

position, and drain tank daily or after each 

use.

If electrical sparks from the compressor 

come into contact with flammable vapors, 

they may ignite, causing fire or explosion.

Restricting any of the compressor's 

ventilation openings will cause serious 

overheating, and could cause fire.

Unattended operation of this product could 

result in personal injury or property 

damage. To reduce the risk of fire, do not 

allow the compressor to operate 

unattended.

Improper operation or maintenance of this product could result in serious injury andproperty 

damage. Read and understand all warnings and operating instructions before using this 

equipment.

Содержание 099-4119-2






























Отзывы: