background image

WARNING: Risk of Bursting

Air Tank:

The following conditions could lead to a weakening of the tank, and result

in a violent tank explosion and could cause property damage or serious injury.

How To Prevent It

What Could Happen

How To Prevent It

What Could Happen

WARNING: Risk from Flying Objects

5

 

   

 

   

1. Failure to properly drain condensed water 

    from tank, causing rust and thinning of 

    the steel tank.

Drain tank daily or after each use. If tank 

develops a leak, replace it immediately with 

a new tank or replace the entire compressor.

Never drill into, weld, or make any 

modifications to the tank or its attachments.

The tank is designed to withstand specific 

operating pressures. Never make 

adjustments or parts substitutions to alter 

the factory-set operating pressures.

For essential control of air pressure, you 

must install a pressure regulator and 

pressure gauge to the air outlet (if not 

equipped) of your compressor. Follow the 

equipment manufacturer's recommenda-

tions, and never exceed the maximum 

allowable pressure rating of attachments. 

Never use the compressor to inflate small, 

low-pressure objects such as children’s toys, 

footballs, basketballs, etc.

2. Modifications or attempted repairs to the 

    tank.

3. Unauthorized modifications to the 

    unloader valve, safety valve, or any other 

    component that controls tank pressure.

4. Excessive vibration can weaken the air 

    tank and cause a rupture or explosion.

The compressed air stream can cause soft 

tissue damage to exposed skin, and can 

propel dirt, chips, loose particles,

and small objects at high speed, resulting in 

property damage or personal injury.

Always wear ANSI Z87.1 approved safety 

glasses with side shields when using the 

compressor.

Never point any nozzle or sprayer toward 

any part of the body or at other people or 

animals.

Always turn the compressor off and bleed 

pressure from the air hose and tank before 

attempting maintenance or attaching tools 

or accessories.

ATTACHMENTS & ACCESSORIES:

Exceeding the pressure rating of air tools, 

spray guns, air-operated accessories, tires, 

and other inflatables can cause them to 

explode or fly apart, and could result in 

serious injury.

Содержание 099-4119-2






























Отзывы: