model no. 062-3425-4 | contact us 1-800-689-9928
6
SAFETY
ADDITIONAL SAFETY PRECAUTIONS
1. Know the pump applications, limitations, and potential hazards.
2. Make certain the electrical power source is adequate for the requirements of
the pump.
3.
ALWAYS disconnect the power to the pump before servicing.
4.
Release all pressure within system before servicing any component (drain all
water from the system).
5.
Secure discharge line before starting pump. An unsecured discharge line could
whip, possibly causing personal injury and/or property damage.
6.
Secure the pump on a solid base.
7.
Check that all pipe connections are tight to minimize leaks.
8.
Make certain the electrical circuit to the pump is protected by a dedicated 15 A
or larger fuse or circuit breaker.
9.
Never use extension cords with this pump!
10.
Do not handle pump or pump motor with wet hands or when standing on wet
or damp surface, or in water.
11.
Wear safety glasses at all times when working with pumps.
12.
Follow all electrical and safety codes, particularly the National Electrical Code
(NEC) or the Canadian Electrical Code (CEC), and in the workplace, the
Occupational Safety and Health Act (OSHA) or the Canadian Centre for
Occupational Health and Safety (CCOHS).
13.
This unit is designed only for use on 115 V or 230 V, 60 Hz. Directly connect
pump wires into properly grounded circuit board in accordance with the NEC or
CEC and local codes and ordinances. All wiring should be performed by a
qualified electrician.
14.
Protect the electrical cord from sharp objects, hot surfaces, oil, and chemicals.
Avoid kinking the cord. Do not use damaged or worn cords. Failure to properly
wire this pump is dangerous and will void the warranty.