MasterCraft 062-3425-4 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 16

MasterCraft 062-3425-4 Скачать руководство пользователя страница 10

model no. 062-3425-4 | contact us 1-800-689-9928

10

INSTALLATION INSTRUCTIONS

Using PVC purple primer and PVC
cement, attach as many sections
of rigid PVC pipe and couplings
(not included) as needed to
connect the male PVC adaptor to
the PVC elbow.
Ensure the pipe slopes slightly
toward the well (to prevent air
trapping in the pipe).

Wrap thread tape around the
threads of a male PVC adaptor
(not included). Thread the
adaptor into the front of the
pump (A).

Wrap thread tape (not included)
around threads of a 1" (2.5 cm)
discharge tee (not included).
Using a pipe wrench, thread the
1" (2.5 cm) discharge tee into
top of the pump.

5

6

7

8

A

A

A

Using PVC purple primer and PVC
cement, attach a 1 1/4" (3.2 cm)
PVC elbow (not included) onto the
rigid PVC pipe extending from the
well seal.

9

Wrap thread tape (not
included) around the threads
of a 1" (2.5 cm) male PVC
adaptor (not included), and
thread the adaptor into the
discharge tee.

A

«
...
8
9
10
11
12
...
»

Содержание 062-3425-4

















Отзывы:

Нет отзывов