WARNING!
DO NOT use cutting wheels rated less than the no load speed of this tool. Failure
to heed this warning could result in personal injury. DO NOT use a wheel with
cracks, gaps, or teeth.
WARNING!
A 4 1/2” (11.5 cm) cutting wheel is the maximum wheel capacity of the saw.
NEVER use a wheel that is too thick to allow wheel washer to engage with the
flats on the arbour. Larger wheels will come in contact with the upper blade
guard, while thicker wheels will prevent the arbour nut from securing the wheel
on the arbour. Either of these situations could result in serious accident and can
cause serious personal injury.
17
16
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
INSTALLING THE BASE FOOT (Fig. 3)
•
Turn the saw upside down and insert the four base feet
(8) into the openings on the underside of the wet tile
saw.
TILE CUTTING WHEEL
For maximum performance and safety, it is recommended that you use the 4 1/2” (11.5 cm) cutting wheel
provided with your saw.
INSTALLING THE TILE CUTTING WHEEL AND
RIVING KNIFE (Fig. 4a-4i)
•
Unplug saw and remove bevel table (4).
Fig. 3
Fig. 4a
8
4
model no. 055-6789-8 | contact us 1-800-689-9928
NO.
Description
Qty.
Illustration
Base foot
Hook wrench
Angle wrench
9
10
11
4
1
1
TOOLS NEEDED FOR ASSEMBLY
Star-head screwdriver
WARNING!
If any parts are damaged or missing, do not operate this tool until the parts are
replaced. Use of this product with damaged or missing parts could result
in serious personal injury.
•
Do not attempt to modify this tool or create accessories not recommended for
use with this tool. Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible serious personal injury.
•
Do not connect to power supply until assembly is complete. Failure to comply
could result in accidental starting and possible serious personal injury.
•
Risk of injury! Always pull out the mains plug (disconnect the product from its
power supply) before commencing work on the product.
UNPACKING
Do not use this product if any parts of the package contents are already assembled to your product when you
unpack it. Package contents are not assembled to the product by the manufacturer and require customer
installation. Use of a product that may have been improperly assembled could result in serious personal injury.
•
Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
•
Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool.
•
The saw is factory set for accurate cutting. After assembling it, check for accuracy. If shipping has influenced
the settings, refer to specific procedures explained in this manual.
•
If any parts are damaged or missing, please call 1-800-689-9928 for assistance.
