KEEP MACHINE CLEAN
Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned
with a soft damp cloth. Never use solvents to clean plastic parts. Solvents could possibly dissolve
or otherwise damage the material.
WARNING:
Wear safety glasses while using compressed air.
FAILURE TO START
Should your machine fail to start, check to make sure the prongs on the cord plug are making good
contact in the outlet. Also, check for blown fuses or open circuit breakers in the line.
LUBRICATION
Apply household floor paste wax to the machine table and extension table or work surface weekly.
KEEP THE CUTTERHEAD SHARP
Before use always check the state of the cutterheads and keep the cutterheads sharp.
STORAGE OF MACHINE
Store the machine in a dry place, out of reach of children.
21
VII. Maintenance
WARNING:
Make sure that the jointer is turned off and unplugged from power source before maintenace
operations.
