MasterCraft 054-8259-0, Инструкция по эксплуатации

Страница: 10 / 13

headline bars
continuation tabs
notes
warnings
model no. 054-8259-0 | contact us 1.800.689.9928
19 18
MAINTeNANCe
befORe eACH USe
1. Inspect the jigsaw, the trigger switch, the cord and the accessories for damage.
2. Check for damaged, missing, or worn parts.
3. Check for loose screws, misalignment or binding of moving parts, or any other condition that may affect
the operation.
4. If abnormal vibration or noise occurs, turn the tool off immediately and have the problem corrected before
further use.
5. Unplug the tool from power source before cleaning or performing any maintenance. Using compressed
air may be the most effective cleaning method. Always wear safety goggles when cleaning tools using
compressed air.
TROUbLeSHOOTINg
Problem Possible Causes Solution
The motor does not start The tool is not connected to a power source Connect the tool to a power source
Blade cannot be removed Saw dust in the slot Clean the clamp slot with a brush
Cutting is difficult Saw blade is worn Replace the saw blade
If the problem remains unsolved after performing the checks described above, call the toll-free helpline at
1-800-689-9928.
CAUTION!
• Do not allow brake fluids, gasoline and petroleum-based products, penetrating oil, etc.
come into contact with plastic parts. These substances contain chemicals that can
damage, weaken, or destroy plastic.
• When servicing, use only identical replacement parts. The use of any other parts may
create a hazard or cause damage to the product.
• Use only accessories that are recommended for this jigsaw by the manufacturer.
Accessories that may be suitable for one tool may become hazardous when used with
another tool.
• Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with
sharp cutting edges are less likely to bind, and are easier to control.
• To ensure safety and reliability, all repairs should be performed by a qualified service
technician.
FPO
MAINTENANCE TROUBLESHOO
TING