MasterCraft 054-7947-8, Инструкция по эксплуатации

Страница: 16 / 24

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
16
model no. 054-7947-8 | contact us 1-800-689-9928
WARNING!
• Never use a cutting wheel with a rated speed lower than the speed shown on the grinder nameplate.
• Use only Type 41 cutting wheels.
FPO
MOUNT THE CUTTING WHEEL (NOT
INCLUDED) (fig 8-9)
1. Remove the battery pack from the angle grinder.
2. Make sure that the grinding guard is securely in
place. Depress the spindle-lock button. Loosen the
outer flange with the supplied wrench while holding
the spindle lock button down (fig 9).
3. Place the inner flange on the spindle; make sure
that the inner flange is positioned so that the shape
of the opening in the flange corresponds with the
shape at the base of the spindle.
4. Place the cutting wheel on the spindle.
5. The outer flange should be turned to the opposite
direction to make the flat side of the outer flange
contact the cutting wheel (fig 8).
6. Press the spindle-lock button to prevent movement
of the spindle.
7. Keep the spindle-lock button depressed; tighten the
threaded outer flange by turning it clockwise with
the wrench (fig 9).
ON/OFF SWITCH (fig 10)
The tool is switched “ON” with the switch button
located at the top of the motor housing. The switch
can be locked in the “ON” position, a convenience
for long grinding operations. The symbol “O” on
the motor housing indicates OFF; the symbol “l”
indicates ON.
1. To turn the tool ON without locking it, slide the
switch button forward by applying pressure only at
the rear portion of the button.
2. To unlock the switch and turn the tool OFF, press and release the rear portion of the switch button; it will
return to the OFF position automatically.
OPERA
TING INSTRUCTIONS
fig 9
Spindle-lock
button
fig 10
Switch button
fig 8
Outer flange
Inner flange
Spindle
Cutting
wheel