MasterCraft 054-7947-8, Инструкция по эксплуатации

Страница: 14 / 24

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
14
model no. 054-7947-8 | contact us 1-800-689-9928
INSTALL/REMOVE THE AUXILIARY
HANDLE
(fig 3)
Use the auxiliary handle for safe control and ease of
operation.
1. Remove the battery pack from the angle grinder.
2. Insert the auxiliary handle into the mounting
holes on the tool, and then turn the auxiliary
handle clockwise to securely tighten it in place.
The auxiliary handle may be installed on the
right side, left side, or top of the tool.
3. Simply turn the auxiliary handle counter-clockwise to remove the auxiliary handle.
INSTALL/REMOVE THE CUTTING GUARD
(
fig 4)
1. Remove the battery pack from the angle grinder.
2. Use the cutting guard to cover the grinding
guard: position one hook of the cutting guard to
engage the grinding guard, and then push the
cutting guard until the other hook fully engages
with the grinding guard.
3. To remove the cutting guard, use your finger to
detach one hook from the grinding guard, and
then the cutting guard can be pulled out easily.
OPERA
TING INSTRUCTIONS
WARNING!
• For cutting-off application, always work with the cutting guard installed to protect yourself from serious
injury.
• Never use your grinder with the guard removed. It has been designed for use only with the guard attached.
Attempting to use the grinder with the guard removed will result in loose particles being thrown against the
operator and possibly serious personal injury.
• Only use the grinding guard with grinding wheels. Make sure that the guard-adjusting lever secures the
grinding guard before operation. Keep the grinding guard between you and wheel. Do not direct the grinding
guard opening towards your body.
FPO
fig 3
Mounting holes
Auxiliary handle
fig 4
Hook
Grinding guard
Hook
Cutting
guard
NOTICE:
If you couldn’t remove the cutting guard by your finger, use a flat-head screwdriver to detach the hook from the
grinding guard.