13
model no. 054-7281-0 | contact us 1-800-689-9928
model no. 054-7281-0 | contact us 1-800-689-9928
1. MOUNTING ACCESSORIES
Caution:
For all work or when changing accessories, always
wear protective gloves. Avoid risk of injury from the sharp edges
of the accessories. Accessories can become very hot while
working, presenting danger of burns!
Make sure the tool is
unplugged prior to changing accessories.
Warning:
To reduce the risk of injury, do not let the sharp side of
the accessory face back toward the user’s hand.
TO CHANGE THE ACCESSORY
The tool-less blade change lever allows you to change the
accessories without using an Allen key.
(1a) For accessories with an open-ended connection, flip the
tool-less blade change lever (1) forward to the open position to
loosen the flange (7). Remove the flush-cutting blade. (See Fig.
A)
(1b) For accessories with a closed-ended connection, flip the
tool-less blade change lever (1) forward to the open position
and completely remove the flange (7). Remove the flush-cutting
blade. (See Fig. B1, B2)
NOTE:
Before using the tool, read the instruction manual carefully.
OPERA
TING INSTRUCTIONS
Fig. A
Fig. B2
Fig. C
Fig. D
Fig. E
Fig. F
Fig. G
Fig. H
Fig. B1
1
2
1
2
1
2
