MasterCraft 054-4265-8, Инструкция по эксплуатации

Страница: 9 / 16

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
9
OPERATION INSTRUCTIONS
TO ATTACH BATTERY PACK (fig 1)
1. Align the raised platform on the battery pack with
the grooves on the bottom of the tool, then slide the
battery pack into the body of the tool.
2. Make sure it latches securely into place.
TO DETACH BATTERY PACK (fig 1)
1. Depress the battery-release button located on the
front of the battery pack to release the battery
pack.
2. Pull the battery pack toward the front of the tool to remove it from the tool.
TURN THE SPOT LIGHT ON AND SELECT
THE BRIGHTNESS MODE (fig 2)
1. Press the switch button: the light is on the white
light setting.
2. Press the switch a second time: the light is on the
red light setting.
3. Press the switch a third time: the light will turn off.
UTILITY HOOK
Your light is equipped with a convenient utility hook for hanging your light. To use, simply lift the hook
until it snaps into the open position. When not in use, always lower the hook until it snaps into the
closed position.
OPERA
TING INSTRUCTIONS
WARNING!
• Do not direct the light beam at persons or animals before attaching the battery pack. The light will be on if
you didn’t turn off the light last time. Turn the light off before detaching the battery pack.
FPO
fig 1
Latch
Detach
Attach
fig 2
Switch
Button
NOTICE:
When attaching the battery pack into the tool, make sure that the raised platform on the battery pack aligns with the
grooves on the bottom of the tool and that the latches snap properly into place. Improper assembly of the battery pack can cause
damage to internal components.