MasterCraft 054-3167-8, Руководство пользователя

Страница: 16 / 22

16
REMOVING NUTS
1.
Press the forward/reverse button to the
RIGHT for removing nuts (Fig. 7).
2. Place the socket fully onto the nut.
3. Hold the nut driver socket and impact
driver firmly against the nut with both
hands. With the nut driver aligned with the
nut, squeeze the trigger switch to start the
impact driver and remove the nut.
NOTE: When removing fasteners, do not allow
the impact driver to operate more than 5
seconds unless the fastener begins to turn. If
the fastener fails to turn within 5 seconds,
reverse the direction of rotation and operate the
impact driver in a forward direction on the
fastener for a few seconds. Now switch back to
reverse direction and remove the fastener. This
procedure will usually break loose seized or
"frozen" fasteners.
WARNING: Operating the impact driver for
more that 5 seconds at a time on a seized or
"frozen" fastener will place severe stress on the
impact driver and cause damage. It may also
break the fastener.
ASSEMBLY AND OPERATING
!