MasterCraft 054-1277-8, Руководство пользователя

Страница: 14 / 24

14
DRILL / HAMMER CONTROL
– cont’d
WARNINGS:
a) Always use a face shield, hearing
protection and a dust mask when
drilling in concrete.
b) Always use carbide tipped masonry
bits when drilling in masonry. Any other
type of bit could break and possibly
cause serious injury.
INSTALLING BITS & ACCESSORIES IN
THE SDS-PLUS
®
ACCESSORY
CLAMPING SYSTEM
WARNING:
Only use SDS-plus
®
accessories in the SDS-plus
®
accessory
holder. Using any other accessories may
result in the bits coming loose and possibly
injuring the operator.
To install an SDS-plus
®
spine carbide drill
bit:
1. Remove the tool plug from the power
source.
2. Slide the accessory clamping collar (1)
toward the rear of the tool (Fig. 5).
3. Insert the shank of the drill bit (2) into
the accessory holder.
NOTE : Make sure the two open keyways
(3) in the drill shank align with the two
matching keys (4) inside the accessory
holder.
4. Push the drill bit shank fully into the
accessory holder and release the
accessory clamping collar so it can
slide forward to lock the drill bit shank
into the accessory holder.
!
ASSEMBLY AND OPERATING
!
Fig. 5