MasterCraft 054-1277-8, Руководство пользователя

Страница: 12 / 24

12
FORWARD / REVERSE SWITCH
The forward / reverse switch (1) is
conveniently mounted above the trigger
switch (Fig. 1). To make the drill rotate
clockwise for drilling or driving screws,
push the forward / reverse switch to the
left. To make the drill rotate counter
clockwise for removing screws, push the
forward / reverse switch to the right.
NOTES:
a) Never change the position of the
forward / reverse switch while chuck is
turning.
b) The trigger switch will NOT function with
the forward / reverse switch in the middle
position.
VARIABLE SPEED TRIGGER SWITCH
This drill is equipped with a variable speed
ON / OFF trigger switch.
1. To start drill, gently squeeze the
trigger switch (2) (Fig. 2).
NOTE: The drill will turn at its slowest
speed when the trigger switch is moved
only a small amount. The drill will turn at its
fastest speed when the trigger switch is
fully depressed.
2. To stop the drill, release the trigger
switch.
NOTE:
Drilling at a slow drilling speed for
an extended period of time may cause the
drill motor to overheat. If the drill gets hot,
stop drilling and allow it to cool for at least
15 minutes.
ASSEMBLY AND OPERATING
Fig. 2
Fig. 1