MasterCraft 054-1250-0, Руководство пользователя

Страница: 16 / 24

16
ACCESSORY DESCRIPTION & USE
ASSEMBLY & OPERATION
ON/OFF & SPEED CONTROL SWITCH
Both the ON/OFF and speed control
functions are controlled by one switch (1)
located on the top of the tool (see Fig. 1).
To turn the tool ON, slide the switch to the
right. To turn the tool OFF, slide the switch
to the left.
To increase the speed, turn the tool ON
and continue to slide the switch to the right.
To decrease the speed, slide the switch to
the left.
Accessory Description Accessory Use
Stainless steel brush Stainless steel brushes do not cause "after-rust"
when used on corrosive-resistant materials like
pewter, aluminum and stainless steel.
Mandrel for emery-impregnated
polishing wheel Use with emery-impregnated polishing wheel.
Carbide grout cutter Ideal for use on wall and floor grout.
Flap wheel Flap wheels grind and polish flat or contoured
surfaces. They are used most effectively to finish
a surface after heavier sanding and material
removal have been completed.
Diamond wheel point Great for cutting, sawing and carving of hard
materials such as marble, concrete, brick,
porcelain, ceramics, hard epoxy and soft and hard
wood.
Engraving Cutter For detail engraving, carving and routing in wood,
fibreglass, plastic and soft metals.
Tungsten-carbide cutter Use for shaping, smoothing and material removal.
Use on hardened steel, stainless steel, cast iron,
nonferrous metals, fired ceramics, plastics, hard
woods and other hard materials.
NOTE: This Mastercraft
®
Rotary Tool is also compatible to most accessories and
attachments provided by other leading brands.
Fig. 1