MasterCraft 054-1245-4, Руководство пользователя

Страница: 17 / 26

17

INSTALLING A GRINDING DISC
WARNING:
Use the correct size of
grinding disc. Never use a disc thinner
than
5
/
32
".
1. Depress the spindle lock button and
rotate the outer clamp nut (1) until
spindle locks (Fig. 9).
2. Turn the outer clamp nut counter
clockwise and remove it from the
spindle.
NOTES:
a) If the outer clamp nut (1) cannot be
loosened by hand, use the wrench (2)
provided.
b) DO NOT remove the inner disc flange
(3).
3. Make sure the flats in the inner disc
flange are engaged with the flats on
the spindle.
4. Place the grinding disc (4) over the
spindle (5) with the concave side of
the disc facing out.
5. Screw the outer clamp nut onto the
spindle with the flat side of nut facing
outward away from the disc. Fit the
raised small diameter portion of the
clamp nut into the hole in the grinding
disc.
NOTE: Finger tighten only.
6. Depress the spindle lock button and
rotate the grinding disc clockwise until
the spindle locks.
7. Securely tighten the clamp nut with
the wrench provided
ASSEMBLY AND OPERATING
Fig. 9
!