13
CAUSE
PROBLEM
SOLUTION
• It is not plugged in.
• There is no electrical current
to the plug because the fuse
has blown or the automatic
power limiter has activated.
• The connection controls are
not on.
• Plug in.
• Change the fuse or reset the
automatic power limiter.
• Switch the controls on.
• The refrigerator is
incorrectly levelled.
• Level it, with the leveller
bases.
• Temperature selection is set
too hot.
• The door is not properly
closed or is opened very
frequently.
• The space between the
refrigerator and floor or the
top of the refrigerator has
been covered.
• The refrigerator is exposed
to direct sunlight or a heat
source.
• A large amount of food has
been introduced.
• There is something
obstructing the ventilation
grilles
• Set temperature selection to
maximum cold.
• Ensure that the door does not
remain open too long.
• Keep these areas free as
described in the
"Installation" section in this
manual.
• Relocate the refrigerator or
protect it from these heat
sources.
• Consult the section on
"operation and use of the
refrigerator".
• Remove any obstacles
blocking the air outlet of the
ventilation grilles.
• The doors are not properly
closed.
• The doors are opened often.
• The food was introduced
recently.
• Temperature selection in a
high position.
• Close the door properly.
• Avoid opening the door
frequently.
• Wait for the appliance to
return to normal.
• Set the temperature switch to
less cold.
The refrigerator does not
operate
The refrigerator vibrates.
The refrigerator or freezer is
not very cold
The motor runs permanently.
7. TROUBLESHOOTING
ENGLISH
Содержание LCE-818NF
