CLKTCD Series User Manual
– Rev. 2.0.1
Page 29
Clock Hand Position
The Clock Hand Position button provides two functions.
•
Allows the user to calibrate or fine tune the hands of the clock
•
Set the second hand mode function from sweep to step mode.
Sweep mode
Sweep mode is the default mode and displays a continuous second‐hand smooth motion.
Step mode
The step mode motion is similar to the motion of a quartz clock. The hand will pulse in one‐second
intervals.
To adjust the hands
1.
Click [Clock Hand Position] to enter the alignment window.
2.
Select the box, “Check to set clock”.
3.
Enter the correct hour, minute and second currently displayed on the face of the clock.
If the second is not currently aligned on a second mark, you can nudge the second hand
forward incrementally by clicking [Forward].
4.
Click [OK] to accept the new settings.
The new hand alignment settings will be stored in non‐volatile flash. The clock hands will adjust to the
new settings and display the time after several moments.
You can check the new settings with a digital display reference at this point to ensure
that the hands have been correctly set.