CLKTCD Series User Manual
– Rev. 2.0.1
Page 12
Mounting
The CLKTCD analog clock is designed for both wall and ceiling mount (model dependent). Power and
low voltage signal wiring should be installed according to local electrical codes, so to access the back
of the clock.
Do not route power or signal cables between the case and the wall (along the exterior of the
wall), which may pinch the power or signal cable and create a hazardous condition.
12” Models
A mounting bracket is supplied which has been designed to fit on either a standard 2”x 4” or 4” x 4”
conduit box. Mount the bracket on the wall/conduit box, attach the time code cable and secure the
clock to the bracket using the supplied retaining screw.