www.desatech.com
120942-01E
10
Bracket
Top
Bracket
Screws
Figure 6 - Attaching Top
aSSeMBLy
Continued
Figure 5 - Installing Axle and Wheels
Heater
Front
Axle
Wheel
Cotter Pin
Wheels and Axle
1. Locate wheels, washers, cotter pins and
axle in hardware packet.
2. Carefully slide axle through heater body
as shown in Figure 5.
3. Slide one wheel and washer onto axle.
Insert cotter pin into end of axle. See
Figure 5.
4. Repeat steps 2 and 3 for second wheel,
washer and cotter pin on other side of
heater.
3. Turn top over and carefully place over
heater, positioning brackets through slots
in heater front and rear panels.
4. Attach brackets to heater with 3/8" screws.
Bracket
Slots
Washer
Top
1. Remove 4 brackets, (8) 1/2" black screws
and (8) 3/8" screws from hardware
packet.
2. Lay top upside down on a clean surface.
Attach 4 brackets to top with 1/2" black
screws.
