Master Lift Conveyor, Инструкция по эксплуатации и техническому обслуживанию

Страница: 25 / 36

www.masterproducts.es
25
5. Place the lower tray
D
by first inserting it into the side of the conveyor belt as shown in the following image and
then sliding it downwards until it is fitted into the tubes of the support.
6. Connect the end of the power cable to the socket connector on the electrical box.
7. Finally, connect one end of the power cord
E
supplied to the socket on the electrical box and the other end to
the mains power supply.
¡IMPORTANT!
Make sure that the electrical wiring is perfectly positioned, without forming loops that could cause
users to trip over.