Master FWT24, Руководство по эксплуатации

Страница: 9 / 27

Henan Master Machinery Co., Ltd
Tel:(+86)17737606271 www.mastermachinerys.com
9
SAFETY PRECATIONS
1. Always keep unauthorized, inexperienced, untrained people away from this
machine.
2. Rotating and moving parts will cause injury if contacted. Make sure guards are
in place. Keep hands and feet away from moving parts.
a. Fuel the machine only when the engine is stopped, using all necessary safety
precautions.
b.
The engine must always be stopped before attempting any repair or
adjustments. Ignition switch should be off.
c.
To avoid slipping and loss of control when starting the trowel, the operator
should maintain good footing. It is recommended that the operator wear safety
shoes for added protection.

Be careful when working around pipes or ducts protruding from the floor or
slab edges. If the trowel blades hit such obstacles, damage to the machine or
possible operator injury may result.

When starting the machine, do not exceed 1/3 throttle position. A higher
setting may cause the Centrifugal clutch to engage and the handle to rotate.
1. Be careful not to come in contact with the muffler when the engine is hot,
serious burns may result!

Over time, the blades will form a sharp edge. Be careful when handling the
old blades.
DANGER: Never operate the machine in an explosive atmosphere, near
combustible materials or where ventilation does not clear exhaust fumes. Repair
fuel leaks immediately. Refer to your engine owner's manual for more safety
instructions.
ASSEMBLY INSTRUCTIONS
Your new Bartell Edger Power Trowel has been shipped to you fully assembled.