Do not allow familiarity with this product to make you careless. Remember that a careless
fraction of a second is sufficient to inflict serious injury.
!
WARNING:
Do not use any attachments or accessories not recommended by the manufacturer of this
tool. The use of attachments or accessories not recommended can result in serious
personal injury.
!
WARNING:
Do not leave items to be inflated unattended while inflator is in use. These items can burst
and could cause serious injury.
!
WARNING:
The inflator is not designed for continuous use. For every five minutes of inflator use, five
minutes of cool down time are required.
NOTICE:
Since the pressure gauge is not calibrated, and is therefore not binding for exact values,
tire pressure must be checked using a reliable measuring device be- fore driving a vehicle
with vehicle tires inflated with the inflator. Driving a vehicle with improperly inflated tires
could result in serious injury.
!
!
!
!
WARNING:
Battery tools are always in operating condition. Always remove battery pack from your tool
when you are as- sembling parts, making adjustments, cleaning, or when not in use.
Removing battery pack will prevent accidental starting that could cause serious personal
injury.
TO INSTALL/REMOVE BATTERY PACK
To install:
1. Place the battery pack in the tool. Align the rib on the battery pack with groove in the battery port.
2. Make sure the latches on the battery pack snap in place and that the battery pack is secured in the
tool before beginning operation.
To remove:
Depress the latches in the front of the battery pack to release the battery pack and remove it from the
tool. (Fig.4)
!
WARNING:
The inflator is capable of inflating to 6.8 Bar. To avoid over inflation, carefully follow
instructions on items to be inflated. To avoid product damage, never exceed recommended
pressures.
APPLICATIONS
You may use this inflator for the purpose listed below: Inflating items such as motorcycle, car, and
bicycle tires.
NOTE:
The inflator is not designed for commercial applica- tions.
NOTICE:
OPERATION
7
Fig.4
Latches
5V USB OUTPUT CHARGING
1.Plug the device USB cable into the USB Output Port (A) on the battery Pack (Fig.2)
2.Press the button (B) for charging (Fig.3)
Содержание MW110D
Страница 11: ......
