Master WORKS MW110D Скачать руководство пользователя страница 4

10.

 Always disconnect the air supply and power supply before making adjustments, servicing an 

      inflator, or when an inflator is not in use.

11. 

Do not attempt to pull or carry the inflator by the hoses.

12. 

Always follow all safety rules recommended by the manufacturer of your inflator, in addition 

      to all safety rules for the inflator.

 Following this rule will reduce the risk of serious personal injury.

13. 

Household use only.

14. 

Do not use inflator as a breathing device.

SAFETY PRECAUTIONS FOR  INFLATOR

15. 

Never direct a jet of compressed air toward people or animals.

 Take care not to blow dust and 

      dirt towards yourself or others. Following this rule will reduce the risk of serious injury.
16. 

Protect your lungs. Wear a face or dust mask if the operation is dusty.

 Following this rule will 

      reduce the risk of serious personal injury.
17. 

Do not use this inflator to spray chemicals.

 Your lungs can be damaged by inhaling toxic fumes.

18. 

Check damaged parts.

 Before further use of the inflator or air tool, a guard or other part that is 

      damaged should be carefully checked to determine that it will operate properly and perform its 
      intended function. Check for alignment of moving parts, binding of moving parts, breakage of 
      parts, mounting, and any other conditions that may affect its operation. A guard or other part 
      that is damaged should be properly repaired or replaced by an authorized service center. Following 
      this rule will reduce the risk of shock, fire, or serious injury.
19. 

Inspect tool cords periodically and, if damaged, have repaired at your nearest Authorized 

      Service Center.

 Constantly stay aware of cord location. Following this rule will reduce the risk of 

      electric shock or fire.
20. 

Risk of bursting. 

Carefully monitor objects during inflation.

21. 

To reduce the risk of over inflation, use a reliable pressure gauge periodically during inflation. 

      The pressure guage on the inflator is for reference only and is therefore not binding for exact values.
22. 

Never leave the inflator unattended during inflation.

23. 

Allow pump to cool for five (5) minutes after each five  (5) minutes of continuous use. 

Never

      block the inflating or deflating outlets while operating.
24. 

Save these instructions. Refer to them frequently and use them to instruct others who may 

      use this inflator. 

If you loan someone this inflator, loan them these instructions also.

SAFETY PRECAUTIONS FOR  INFLATOR

SPECIFICATIONS

• Great for Car/RV/SUV Tires and small inflatables

• Digital pressure gauge automatically shuts off at desired pressure

• Cordless design for convenience

• Comes with nozzle accessories

• Operate from 20V Battery (included) or 12V Power Adapter

• Built in battery indicator

• 

1- Nozzle,1- Ball Needle,

• 1- 12V Car Plug-in Power Base

• 1-20V Li-ion Battery

• 1-charger

• 1-Tool Bag

INCLUDES:

4

Содержание MW110D












Отзывы: