Master Spas TS 240, Руководство пользователя

Страница: 75 / 84

73 DO NOT DIVE.
Spa Controls
Reminder Messages
GENERAL MAINTENANCE HELPS.
Reminder Messages can be suppressed by using the Reminders Screen.
Reminder Messages and frequency may vary. These are general messages to remind users
about normal spa maintenance. Some messages may not apply depending on the actual
equipment in the spa.
CHECK THE PH
May appear on a regular schedule, i.e. every 7 days. Check pH with a test kit and adjust pH with the
appropriate chemicals.
CHECK THE SANITIZER
May appear on a regular schedule, i.e. every 7 days. Check sanitizer level and other water chemistry
with a test kit and adjust with the appropriate chemicals.
CLEAN THE FILTER
May appear on a regular schedule, i.e. every 30 days.
TEST THE GFCI (OR RCD)
May appear on a regular schedule, i.e. every 30 days.
The GFCI or RCD is an important safety device and must be tested on a regular basis to verify its reli-
ability.
Every user should be trained to safely test and reset the GFCI or RCD associated with the hot tub
installation.
A GFCI or RCD will have a TEST button on it that allows a user to verify proper function.
CHANGE THE WATER
May appear on a regular schedule, i.e. every 180 days. Change the water in the spa on regular basis
to maintain proper chemical balance and sanitary conditions.
Additional messages may appear on specific systems.
* Reminder messages can be reset from the panel. Messages that can be reset will appear with a
Clear Icon at the bottom of the Message Screen. Press the Clear Icon text to reset the message.
**M0XX is a Message Code. Codes like this will be seen in the Fault Log