Master Spas TS 240 Скачать руководство пользователя страница 6

Страница: 6 / 84

DO NOT DIVE.

SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

When installing and using this electrical equipment, basic safety precautions should
be observed including the following:

READ AND FOLLOW ALL

INSTRUCTIONS

WARNING – To reduce the risk of injury, do not permit children to use this product
unless they are closely supervised at all times.

A wire conductor is provided on this unit to connect a minimum 6 AWG
(13.302mm

) solid copper conductor between this unit and any metal equipment,

metal enclosures of electrical equipment, metal water pipe, or conduit within 5 feet
(1.5m) of the unit

(For cord-connected/convertible units)

DANGER – Risk of injury.

   a) Replace damaged cord immediately.
   b) Do not bury cord.
   c) Connect to a grounded, grounding type receptacle only.

(For units intended for indoor use only)

WARNING – For indoor use only. This unit is not intended for outdoor use.

(For units intended for outdoor use only)

WARNING – For outdoor use only. This unit is not intended for indoor use.

Содержание TS 240





















































































Результаты поиска

Содержание TS 240

Отзывы:

Похожие инструкции для TS 240

Бренды по названию

Популярные бренды

Master Spas TS 240, Руководство пользователя

Результаты поиска

Содержание TS 240

Отзывы:

Похожие инструкции для TS 240

Бренды по названию

Популярные бренды