manualshive.com logo in svg

Master Forge MFX784BDP, Руководство пользователя, Страница: 23 / 26

Поделиться
Скачать
Master Forge MFX784BDP Скачать руководство пользователя страница 23

23

Lowes.com/masterforge

troUBlesHootiNG

ProBlem

PossiBle caUse

correctiVe actioN

The burner will not

light using the 

igniter procedure.

1.  The igniter electrode may be  

covered with grease or residue.

2. No spark is being generated.

3.  No gas flow or cylinder valve not 

open.

4.  Vapor lock at coupling nut to LP 

cylinder

.

1. Clean the igniter electrode.

2.  Check the connection and 

reconnect any loose or 

disconnected wires

3.  Make sure LP cylinder is not empty 

or open cylinder valve.

4.  Turn off knob and LP cylinder 

valve. Disconnect coupling nut 

from LP cylinder. Reconnect and 

retry.

The burner will not

light with a match.

1.  No gas flow or an obstructed gas 

flow.

1.  Check the fuel level. Clean the 

venturi tube and burner.

The flame goes out.

1 . Disconnected gas supply hose.

2. High or gusting winds.

1. Reconnect the gas supply hose.

2.  Move the grill out of the windy 

area.

Flare-up.

1. Excessive cooking temperatures.

2. Grease and residue build-up.

3. Excessive fat in the meat.

4. Excessive oil in the marinade.

1. Reduce the flame level.

2. Clean the components.

3.  Trim fat from the meat before 

cooking.

4. Use a non-oil based marinade.

Yellow sooty flame. 1. Excessive cooking temperature.

2. Obstruction of gas flow.

3. Ventilation closed. Damper closed.

1. Reduce the flame level.

2.  Check and clean venturi tube and 

burner.

3.  Adjust ventilation and damper  

accordingly.

Содержание MFX784BDP



























Отзывы:

Нет отзывов