14
Lowes.com/masterforge
oPeratiNG iNstrUctioNs
This smoker is designed to operate on LP gas only. The gas cylinder used must include a collar to
protect the cylinder valve. The cylinder supply system must be arranged for vapor withdrawal. Do
not allow dirt or foreign material to get into or onto tank connection when it is not attached to the fuel
supply system. Use the protective cap provided.
WarNiNG:
ALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE FOLLOWED
TO PREVENT FIRE, DAMAGE AND/OR INJURY.
The cylinder outlet must have Type 1 gas connection termination in order to mate with gas hose
provided with smoker. The pressure regulator and hose assembly supplied by the manufacturer with
the appliance must be used. Replacement pressure regulators and hose assemblies must be those
specified by the appliance manufacturer.
This unit is not to be utilized with a non-self-contained LP-gas supply system.
Valve/pressure regulators are factory set to the correct operating pressures. No attempts should be
made to adjust these settings.
moving the smoker with lP tank attached
caUtioN:
DO NOT ATTEMPT TO MOVE THE SMOKER WHILE THE LP TANK OR BURNER
IS TURNED ON, OR WHEN THERE ARE WOOD CHIPS AND WATER INSIDE THE SMOKER.
DOING SO MAY RESULT IN FIRE, DAMAGE, AND/OR INURY. Please follow the procedures in
the section titled “Turning off the Smoker”, on Page 20, before attempting to move the smoker.
caUtioN:
MAKE SURE YOU HAVE COMPLETELY SECURED THE TANK TO THE BACK OF
THE SMOKER BEFORE ATTEMPTING TO MOVE THE SMOKER. REFER TO THE SECTION
TITLED “CONNECTING THE LP TANK”, ON PAGE 13, FOR MORE INFORMATION.
1. Tightly grip the back handle with both hands and place one
foot on the back of the wheel (left or right).
2. While using your foot to keep the smoker from sliding,
slowly tilt the smoker back.
WarNiNG:
DO NOT ATTEMPT TO TIP THE SMOKER
MORE THAN A 35° ANGLE. THIS MAY RESULT IN
DAMAGE TO SMOKER AND THE LP TANK.
3. Once the smoker is tilted, keep both hands on the back
handle and remove your foot from the wheel axle. Move the
smoker to the desired location.
If the product is not in use, the gas must be turned off at the supply cylinder and the cylinder should
be disconnected from the appliance.
Storage of the appliance indoors is only permissible if the cylinder is disconnected and removed from
the appliance. Do not store cylinder indoors.
WarNiNG:
ALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE FOLLOWED
TO PREVENT FIRE, DAMAGE AND/OR INJURY.
35°