background image

Page 9

3. 

Due to Lithium-Ion’s fade-free 
properties, the only time it is necessary 
to charge the Lithium- Ion battery pack 
is when the pack has reached the end of 
its charge. To signal the end of charge, 
power to the tool will drop quickly. 
Charge the battery pack as needed.

HOW TO CHARGE THE bATTERy 

PACk (fIG.2)

A fully discharged battery pack will charge 
in about 30 minutes in a surrounding 
temperature between 50°F (10°C) and 104°F 
(40°C).
1.  Charge the Lithium-Ion battery pack 

with the correct charger.

2.  Connect the charger to a power supply.
3.  Align the raised ribs of the battery pack 

with the slot in the charger.

4.  Insert the battery pack into the charger.
5.  The charger will communicate with the 

battery pack to evaluate the condition of 
the battery pack.

6.  The green lights will flash while the 

battery pack is charging. After charging 
is complete, the green LED on the 
charger will be on. The flickering red 
light indicates a defective battery or a 
bad connection between the battery 
and the charger.

7.  The battery pack will fully charge, but 

will not overcharge, if left on the charger.

MAINTANCE

 WARNING:

 To ensure safety and 

reliability, all repairs should be performed 
by a qualified service technician at 
Authorized Service Center.

 WARNING:

 Always wear safety 

goggles or safety glasses with side shields 
when using compressed air to clean tool. 
If the operation is dusty, also wear a dust 
mask.

 WARNING:

 To avoid serious 

personal injury, always remove the battery 
pack from the tool when cleaning or 
performing any maintenance.

bATTERIES:

The battery pack is equipped with Lithium-
Ion rechargeable batteries. The duration of 
use from each charge will depend on the 
type of work performed.
The batteries in this tool have been designed 
to provide maximum trouble-free life. Like 
all batteries, they will eventually wear out. 
Do not disassemble the battery pack or 
attempt to replace the batteries. Handling 
the batteries, especially when wearing rings 
and jewelry, could result in a serious burn.
To obtain the longest possible battery life, 
read and understand the operator’s manual.
It is good practice to unplug the Charger and 
remove the Lithium-Ion battery pack when 
it is not in use. For Lithium-Ion battery pack 
storage longer than 30 days:
1.  Store the Lithium-Ion battery pack 

where the temperature is below 80°F 
(26°C) and free of moisture.

2.  Store Lithium-Ion battery packs in a 

30%-50% charged condition.

3.  Every six months of storage, fully charge 

the Lithium-Ion battery pack.

4.  Exterior may be cleaned with a cloth or 

soft non-metallic brush.

FIG. 2

Содержание 252-8017













Отзывы: