16
TO ATTACH BATTERY PACk (Fig. 5)
1. Lock the trigger switch on
the drill/driver by placing the
direction of rotation (forward/
reverse/center lock) selector in
center (locked) position
2. Align the raised portion on the
battery pack with the grooves on
the bottom of the drill/driver, and
then attach the battery pack to
the drill as shown.
3. Make sure the latch on the battery pack snaps into place and the battery
pack is secured to the drill/driver before beginning operation.
TO DETACH BATTERY PACk (Fig. 5)
1. Lock the trigger switch on the drill/driver by placing the direction of
rotation (forward/ reverse/ center lock) selector in center position.
2. Depress the battery release buttons located on the front of the battery
pack to release the battery pack.
3. Pull forward on the battery pack to remove from the tool.
CAUTION:
when placing battery pack on the tool, be sure that the raised rib
on battery pack aligns with the groove on the drill/driver and the latches snap
into place properly. Improper assembly of the battery pack can cause damage
to internal components.
TRIGGER SWITCH (Fig. 6a)
To turn the drill/driver ON, depress
the trigger switch. To turn it OFF,
release the trigger switch.
VARIABLE SPEED (Fig.6a)
The variable-speed trigger
switch delivers higher speed with
increased trigger pressure and
lower speed with decreased trigger
pressure.
ATTACH
Fig. 5
Fig. 6a
Direction-of-ro-
tation selector
Variable-speed
trigger switch
