background image

12

UNPACkING

This product has been shipped completely assembled.

  

Carefully remove the tool and any accessories from the box. Make sure 

that all items listed in the packing list are included.

  

Inspect the tool carefully to make sure no breakage or damage occurred 

during shipping.

  

Do not discard the packing material until you have carefully inspected and 

satisfactorily operated the tool. 

PACkING LIST

Drill/Driver, double end bit,

 

Battery Packs, Charger, soft case and Operator’s 

manual

OPERATION

POWER INDICATOR

This Li-Ion battery pack is equipped with a power indicator which is used to 

display the battery pack’s remaining run time. Press the power indicator button to 

display the LED lights. The LED lights will stay lit for approximately 4 seconds.

NOTE:

 the power indicator can be used whether the battery is attached to or 

removed from the tool.

LOW CAPACITY WARNING

If one LED on the power indicator begins to flash, the battery pack’s charge is 

under 20% capacity and should be recharged.
Unlike other battery pack types, Lithium-Ion battery packs deliver fade-free 

power for their entire run time. The tool will not experience a slow, gradual 

loss of power as you work. To signal that the battery pack is at the end of 

80-100% 

Charge
60-79% 

Charge
40-59% 

Charge
20-39% 

Charge
Under 20% 

Charge

High/low 

temperature 

BATTERY

Fig. 2

Содержание 241-0416

























Отзывы: