3
CAUTION:
Indicates a potentially hazardous situation,
which, if not avoided, could result in minor or
moderate injury.
CAUTION:
(Without Safety Alert Symbol) Indicates a
situation that may result in property damage.
WARNING:
To ensure safety and reliability, all repairs should be per-
formed by a qualified service technician at an Authorized Service Center.
WARNING:
The operation of any power tool can result in
foreign objects being thrown into your eyes, which can result
in severe eye damage. Before beginning power tool operation,
always wear safety goggles or safety glasses with side shields
and a full-face shield when needed. We recommend a Wide
Vision Safety Mask for use over eyeglasses or standard safety
glasses with side shields. Always use eye protection which is
marked to comply with ANSI Z87.1
SAVE THESE INSTRUCTIONS
Some of these following symbols may be used on this tool. Please study them
and learn their meaning. Proper interpretation of these symbols will allow you
to operate the tool better and more safely.
SYMBOL NAME
DESIGNATION/EXPLANATION
V
Volts
Voltage
A
Amperes
Current
Hz
Hertz
Frequency (cycles per second)
W
Watt
Power
min
Minutes
Time
Alternating
Current
Type of current
Direct Current Type or a characteristic of current
n
o
No Load
Speed
Rotational speed, at no load
Class II
Construction
Double-insulated construction
Per Minute
Revolutions, strokes, surface speed, orbits
etc., per minute
.../min
.../min
.../min
.../min
