Master Digit PCUWS10, Руководство пользователя

Страница: 7 / 15

7
MANUAL PCUWS10
Telecontrol Management
(* optional )
The lower part is the Telecontrol Management (* optional ) that allows users to activate via
the web 4 outputs with NO / NC relay bistable available on the Cannon connector D-Sub 15 -
pin female connector on the back of PCUWS10 ( configuration pinout picture below left) .
The keys to activate the outputs are the first 4 starting from the left marked with the
inscription OUT and numbered from 1 to 4 .
Going to click the left mouse button with the pointer over the button corresponding to ' output
enable , the relay is activated by signaling to the web interface with just clicked the button
that lights up ; the relay will remain activated until you click the left button of the mouse with
the pointer over the button activated.
The other 4 buttons labeled IN and numbered from 1 to 4, representing the opto-isolated
inputs available on the Cannon connector D-Sub 9 -pin female connector on the back of
PCUWS10 ( pinout configuration of the image in the lower right corner ) .
By providing a TTL level signal (0-5 V) inputs , it will light the corresponding button on the
web interface on the first refresh of the page , indicating the status of the ( off - 0V/5V - ON).
Both the outputs and inputs are useful for managing utilities and machinery on the site ,
remotely manageable via a web interface on any device (PC, laptop , tablet , smartphone,
etc.) that has a browser and Internet interfaces .
LIMITED WARRANTY
MASTER DIGIT issues this limited warranty to the purchaser
the original product. This limited warranty is not transferable. the
warranty covers defects in workmanship and materials for two years from the date of
purchase. The customer must return the product with proof of purchase to the
point of purchase. If the battery charger has been opened, tampered with or
repaired by anyone other than MASTER DIGIT or their representatives
authorized, the warranty will be invalidated. The charger is equipped with
seal. Removing or tampering with the seal will void the warranty.
MASTER DIGIT makes no warranty other than this warranty
limited and can not be held responsible for any other costs those
mentioned above or consequential damages. In addition, MASTER DIGIT
is not bound to any other warranties in addition to this warranty.
SUPPORT
MASTER DIGIT offers a service and / or installation professional: www.masterdigit.eu
E-mail: info@masterdigit.eu, phone: +39 3687692793.