Master cook CLASSIC 500, Руководство пользователя

Страница: 17 / 22

5. Installing with gas supply system
Important Notes:
To operate you will need a precision-filled standard G30/G31 barbecue LP gas cylinder with
external valve threads.
Use standard flexible tube with length less than 1.5 m. The tube shall be readily visible across
its entire length for inspection after installation.
Danger: You must have the proper regulator and bottle in order for the barbecue to operate safely
and efficiently. Use of an incorrect or faulty regulator is dangerous and will invalidate any warranty.
Connect LP Gas cylinder
Before connecting, be sure that there is no debris caught in the head of the LP tank, head of the
regulator valve or in the head of the burner and burner ports.
Connect gas line to tank by turning knob clockwise until it stops, make sure that the tube is not
subject to twisting.
Disconnect LP Gas cylinder
Before disconnecting make sure the LP gas tank valve in “CLOSED”
Disconnect gas line from LP gas cylinder by turning knob counterclockwise until it is loose.
After connecting to gas cylinder, a leak testing is necessary.
Danger
: When changing the gas container, care must be taken to keep away from any source of
ignition.
Leak Testing
(To be performed in a well-ventilated area)
Confirm all barbecue control knobs are in the off position.
Open the gas control valve on gas cylinder.
Check for leaks by brushing soap solution over all gas system joints, including all valve
connections, hose connections and regulator connections.
NEVER USE AN OPEN FLAME to test for leaks at anytime.
If bubbles form over any of the joints, there is a leak. Turn off the gas supply and retighten that
joint. Repeat the test. If bubbles form again, stop trying; contact your local dealer for assistance.
Leak test annually, and whenever the gas cylinder is removed or replaced.
17