Master Bilt PT44 Скачать руководство пользователя

Страница: 3 / 4

05/15 Rev. C 146574

TROUBLESHOOTING

Problem

Remedy

Compressor will
not start

Check the power cord and make sure it is plugged in.

Check the temperature controller. If it is in the “OFF”

position, turn it clockwise to set a desired temperature.

Poor performance

Move the unit from direct sunlight.

Move the unit away from heating devices.

Install the unit in a well ventilated place, with at least 7

inches of clearance on all sides.

Clean the condenser if heavy dust is collected.

Clear contents from blocking the air duct.

Check the temperature controller for incorrect setting.

Check the refrigerant level, it may need to be charged.

Check the door and be sure it is completely closed.

Unit noisy

Check fan blades to see if they are contacting anything.

Maintain 7 inches of clearance from the wall.

Check for loose part or mounting.

Keep the tubing free from any contact to avoid rattle.

Condensation on
cabinet exterior
and/or floor

Reduce humidity where the unit is installed.

Repair or replace the gasket on the door.

Содержание PT44

Страница 1: ...door s have come out of alignment during shipping they will need to be adjusted This can be accomplished by opening the door s and loosening the screws that hold both the top and bottom hinges to the...

Страница 2: ...on the plastic parts door handle or trim strips as they can cause failure Use mild soap and warm water on plastic parts The door gaskets should be cleaned in place with a mild soap solution to extend...

Страница 3: ...clearance on all sides Clean the condenser if heavy dust is collected Clear contents from blocking the air duct Check the temperature controller for incorrect setting Check the refrigerant level it ma...

Страница 4: ...93 3 Depth 36 6 Height 42 4 Weight lbs 309 548 698 Electrical Characteristics 115V 60Hz 1Ph Total Amp Draw 6 5 6 5 7 5 NEMA Plug Configuration NEMA 5 15P Condensing Unit Size 3 8 HP 3 8 HP 1 2 HP Ref...