4
3.
SAFETY SYMBOLS
1.LCD Display
4.Frequency/Duty Cycle Button (Hz/%)
In AC voltage/current modes, press “Hz%” and the display will show the
frequency measurement. Press the button again to switch to duty cycle.
Press the button a third time to return to normal display.
2.Hold/Backlight Button
Press “ ” to hold the current reading on the display. Press the button
again to release the hold Hold “ ” to turn on the backlight.
Hold the button again to manually turn off the backlight.
3.Function Switch Button
Press “
FUNC
” to switch between functions or between AC/DC current.
/
,
%”
.
.
5.
6.Rotary Switch
7.Input Jack (all measurements; current below 600mA)
8.A Jack (current measurements between 600mA-10A only)
9.Common Jack (all measurements)
In Hz duty cycle
mode press the“Hz
botton and the display will show the duty cycle
Press the button again to switch to the frequency measurement
NCV Button
Press the “NCV” button down in any mode and the meter will activate the
non-contact voltage detection. Hold the meter up to a voltage source and
the buzzer will sound and the NCV indicator will light up if voltage is
detected. Release the “NCV” button to stop NCV detection.
Important safety information
AC(alternating current)
DC(direct current)
DC/AC Voltage or Current
Double insulation protection
Fuse
Compliance with EU regulations
Ground
4.
FEATURE DETAILS
3
5
4
3
2
6
8
7
9
1
/
F
6
