12
www.ls-electronic.de
13
www.ls-electronic.de
1.
Use the c/- buttons (5/32RC) to select the channel that you want to record from. For example, EXT 2 to record
from a connected SAT receiver or a TV channel location to record television programmes from the cable-TV connection.
2.
If necessary, press the monitor button (24) to view the signal that the DVD Recorder is receiving on the TV screen.
3.
Press the REC button (33) to start recording. The Recorder's display shows the remaining time for the space that is still
available on the DVD.
You can stop recording by pressing the stop button (29). "Menu UPDT" appears in the display; an INDEX window is inserted for
the recorded title.
Recording without automatic switch-off
You can set a switch-off time for the instant recording.
1.
Use the c/- buttons (5/32RC) to select the channel that you want to record from. For example, EXT 2 to record
from a connected SAT RECEIVER or a channel location to record television programmes from the cable-TV connection.
2.
If necessary, press the monitor button (24) to view the signal that the DVD Recorder is receiving on the TV screen.
3.
Press the REC button (33) to start recording.
4.
You can adjust the recording duration in 30-minute steps by pressing the Rec button several times. The device switches
off automatically after this time elapses.
The recording time can be cleared by pressing the clear button (27); it can also be changed at any time by pressing the REC
button again.
You can stop recording by pressing the stop button (29).
Recording with automatic switch-off
You have the option of adding an additional recording to a title that has already been recorded. The new recording is added as a
chapter to the recording. The data is overwritten from this point onwards; the recording quality in which the already existing title
was recorded is used for the new recording too. Titles that follow on from the current title can also be overwritten, depending on
the length of the recording and the remaining space still available on the DVD.
This function is only available when recording onto a DVD+RW.
1.
Start playing the title up to the point at which you want to start the new recording.
2.
Press the play/pause button (30) and use the c/- button (32) to select the channel which you want to record
from.
You can monitor the picture that you want to record by pressing the monitor button.
3.
Start recording by pressing the REC button (33).
4.
You can activate the automatic switch-off function (see previous point) or you can stop the recording at the required time
by pressing the stop button.
Adding recordings to a title (assemble editing) DVD+RW
You can use programmed recording to start recording at some later point in time.
The DVD Recorder switches to the programmed channel number and starts recording.
You can use the DVD Recorder to pre-programme up to 6 different timer recordings within a month.
Note:
Make sure that the date and time of the DVD Recorder are set correctly.
Timer programming
The Recorder needs the following information for timer programming:
•
The date of the recording
•
The channel number of the station or the AV source
•
The starting and finishing time of the recording
•
VPS/PDC on/off
•
The recording quality
1.
Press the timer button (36) to open the timer menu window.
2.
Select the timer programming function using the navigation buttons
56
and press the navigation button
4
to enter
programming mode.
3.
You can move the marker in programming mode using the navigation buttons
3456
(20). The date is marked - you
can change it using the navigation buttons
56
or by entering the date directly using the numerical buttons (31). You
can also use the select button (22) here to choose whether the recording should take place once, every week or from
Monday to Friday.
4.
Move the marker onto the program number
4
and enter it using the navigation buttons
56
or by directly entering it
using the numerical buttons (31).
5.
Next, set the starting time of the recording - proceed in the same way as you did when entering the previous data. If you
press the SELECT button (22), you can also switch VPS recording on/off for the starting time (see Specialist Terms).
6.
Now set the stopping time for the recording and use the select button (22) to set the recording quality.
Confirm the settings you have entered with the OK button (23) and close the menu by pressing the timer button.
Switch the device to standby mode.
If the recording is carried out correctly, timer appears in the display of the DVD Recorder.
Programmed recording
ShowView
The ShowView program system simplifies entering the television programme details. You do not need to enter the starting/stopping
time - all that is required is the ShowView number, which can be found in most TV programme guides.
1.
Press the timer button (36) to open the timer menu.
2.
Use the navigation buttons
56
to select the ShowView System item, and start ShowView programming by pressing
the navigation button
4
.
3.
Now enter the ShowView number of the programme that you want to record. Use the select button to choose whether
the recording should take place once, every week or from Monday to Friday. Confirm with OK.
4.
Enter the channel from which you want to record. You only need to enter this once for each station. The DVD Recorder
then automatically assigns the ShowView numbers to the appropriate channel. Confirm your selection with OK.
5.
The channel number and the starting and stopping time of the TV programme then appear in the display. Check the data,
select the recording mode (quality) and confirm your selection with OK.
Close the menu by pressing the timer button (36).
Switch the device to standby mode. TIMER appears in the Recorder's display.
Timer
Timer programming
VPS Recording
Date Program Start PDC End Mode
01 ARD 20:15 21:30 HQ
Mon-Fri/Weekly
To store
press SELECT
Press OK
Timer
ShowView-system
ShowView-number
-----------------
Mon-Fri/Weekly
To store
press SELECT
Press OK
