9
GL-
Gleis (-)
GL+
Gleis (+)
MOT-
Motor (-)
MOT+
Motor (+)
GND
Dauerhafter (-) Pol. (Z.B. für
einen Pufferanschluss)
Dek+
Gemeinsamer Anschluss (+)
für Lampen- und
Funktionsausgänge
A1
Funktionsausgang 1 (-), div.
Blinkfunktionen, Impuls
LI-V
Licht vorne (-)
LI-H
Licht hinten (-)
3.2 Anschlüsse auf der Unterseite
Auf der Unterseite des eMOTION L
Dekoders sind 6 zusätzliche Anschlüsse
angebracht. Es handelt sich dabei um
Lötkontakte, an denen Anschlüsse für 5
weitere Funktionsausgänge (A2 bis A6)
und einen Servoausgang vorgesehen
sind.
Beachten Sie, dass A3 bis A6 nur mit
je 50mA Strom belastbar sind.
Der Servoanschluss (A3 Servo) ist ein
5V Signal zum direkten Anschluss an
den Servo.
Hier dürfen keine anderen Verbraucher
angeschlossen werden !
GL-
Track (-)
GL+
Track (+)
MOT-
Motor (-)
MOT+
Motor (+)
GND
GND (-) e. g. for a power
buffer
Dek+
Common terminal (+) for
light and function
outputs
A1
function output 1 (-), some
flashing functions, pulse
LI-F
Light front (-)
LI-R
Light rear (-)
3.2 Terminals on the lower side
The lower surface of the eMOTION
L decoder is fitted with 6 additional
soldering pads for the function outputs
A2, A3, A3S, A4, A5, and A6.
Please observe that the outputs A2,
A3, A3S, A4, A5, and A6 are restricted
to 50mAmps each.
A3 Servo is reserved for RC servo
control only.
No other kind of consumer load must be
connected to this output!