Installation Instructions
2 | P a g e
v 1 . 1 ( 1 2 / 2 0 1 8 )
Installation Directions
1. Remove all packaging material from the product and be careful not to throw away accessories that may be hidden
within the packaging material. If assembly is required, lay the luminaire on a smooth non-scratch surface.
2. Use the mounting bracket as a template to mark the position of the holes onto the ceiling. Drill holes into the wall and
place the plastic anchors into the holes. (Step 1)
3. Secure the mounting bracket onto the wall with the screws provided. Ensure the screws and anchors used are
suitable for the mounting surface and the surrounding environment. (Step 2)
4. Connect the mains supply wire to the terminal block. (Step 3)
Mains Supply Wire
Luminaire Wire / Terminal block
Earth – Yellow/Green
Yellow/Green or
Neutral – Blue or Black
Blue or N
Live – Brown or Red
Brown or L
Ensure the wires are secure and no bare wires are exposed.
NOTE: It is recommended that a non-corrosive bead of silicone be applied before installation onto the wall
ensuring that no water can run down into the cabling.
5. Install the main body on the mounting bracket by tightening the screw with the provided allen key. (Step 4)
6. After the installation, switch on the luminaire to test and enjoy your new lighting product.
