8600 - EAME
65
4315972M4 - 2
3
3. Operation
Crop_this_page
(34) Onboard computer
3.1.10 Work lights module
T001483
Controlling the headlights
A keyboard on the right-hand pillar of the cab is used to control the various tractor headlights and rotary bea-
con.
(1)
Switch and indicator light for main beams on
hand rails (available as an option, depending on
the country) (maximum power 2x55 W).
(2)
Switch and indicator light for work lights on
grille (maximum power 6x55 W).
(3)
Front accessory connection socket (maximum
power 2x55 W).
(4)
Switch and indicator light for rear work lights
on fenders (maximum power 2x55 W).
(5)
Switch and indicator light for work lights at rear
of roof (maximum power 4x55 W).
(6)
Switch and indicator light for front work lights
on hand rails (maximum power 2x55 W).
(7)
Switch and indicator light for work lights at
front of roof (maximum power 4x55 W).
(8)
Switch and indicator light for rotary beacon
(maximum power 3x70 W).
The rotary beacon may be activated automati-
cally at 30 km/h (19 mile/h (mph)).
To set the automatic activation, the switch
must be pressed until the indicator light goes
out (approximately 30 seconds). The rotary
beacon comes on as soon as the speed ex-
ceeds 30 km/h (19 mile/h (mph)), but does not
switch off if the speed drops.
To deactivate the automatic activation, the
switch must be pressed until the indicator light
comes on (approximately 30 seconds).
Module operation
–
Work lights (1, 5, 10 and 11): These only operate after the side lights have been activated. Their status is
saved when + ignition on is switched off or when the side lights are switched off.
I004678
Fig. 18.
1
8
2
7
3
6
4
5
I016016
Fig. 19.
B
10
3
5
2
1
11
12
4
7
6
